iLive IAEB25-1630-01 User Manual

Wireless stereo headset

Advertisement

Quick Links

FCC WARNINGS
• Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.

Advertisement

Table of Contents
loading

Summary of Contents for iLive IAEB25-1630-01

  • Page 1 FCC WARNINGS • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 2: Additional Warnings

    ADDITIONAL WARNINGS • WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture. • WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable. •...
  • Page 3: International Support

    International Support To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com Para descargar este Manual del Usuario en Inglés, Español y Francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.com Pour télécharger ce guide de l’utilisateur en Anglais,...
  • Page 4: Contact Information

    Contact Information Website: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Warranty For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.com Made Green Protect for Today Sustain for Tomorrow Specifications are subject to change without notice. Copyright ©...
  • Page 5: Wireless Stereo Headset

    Wireless Stereo Headset User’s Guide for Model IAEB25-1630-01...
  • Page 6 Features • Supports Bluetooth • Supports profile A2DP (Advanced Audio Distribution Profile) • Digital volume control • Built-in microphone • Micro-USB port for battery recharge • Wireless range: 33 feet • DC battery power: built-in rechargeable lithium ion battery • Battery life: approx. 4 hrs at 100% volume 6 hrs at 50% Includes •...
  • Page 7: Overview And Controls

    Overview & Controls Power Switch (side) Micro-USB Power Port Volume +/− (side) Play/Pause/Speakerphone/Pair Press and hold to pair Press to play or pause the current track. Press to answer an incoming call.
  • Page 8: Battery Power

    Battery Power 1. Using a Micro-USB to USB cable (included), connect to the USB port of a powered on computer or USB power adaptor to charge the unit. Charge fully before use. Initial charge time is approximately 2 hours. The LED indicator will display a red light when charging, and turn blue when fully charged.
  • Page 9: Pairing A Bluetooth Device

    Pairing a Bluetooth Device 1. Power on the unit by sliding the Power Switch to the ON position, and press and hold the Play/Pause/Speakerphone/Pair button for 4 seconds. When pairing, remain within 3 feet of the unit. 2. Using the controls on your Bluetooth device, select IAEB25 in your Bluetooth settings to pair.
  • Page 10: Playing Audio Wirelessly

    Playing Audio Wirelessly 1. Use the controls on the connected Bluetooth Device to select a track. 2. To play or pause the selected track, use the controls on the connected Bluetooth Device or press the Play/Pause/Speakerphone/Pair button. 3. Audio played through the connected Bluetooth device will now be heard through the speakers.

Table of Contents