Table of Contents
Advertisement
17
MAINTENANCE
Cleaning the water inlet filters
Clean the water inlet filters periodically to prevent
clogging. Take extra care to clean the water inlet
filters for areas using hard water. Water may not
be supplied if there are foreign objects, such as
rust, sand, or stones in the water inlet filters.
1
Pull out the plug to turn off the
washing machine.
2
Turn off the faucets connected with the
water inlets.
3
Remove the water inlet hoses.
WARNING
• Unplug the power cord and turn off the
faucets before cleaning. Failure to do so
may cause electric shock.
• Do not use the washing machine without
inlet filters. If you use the washing machine
without the inlet filters, it will cause leaks and
malfunction.
• If you use the washing machine in an area
with hard water, the inlet filter may clog due
to buildup.
NOTE
•
message will blink on the display when
the water pressure in the detergent drawer
is weak or an inlet filter is clogged with dirt.
Clean the inlet filter.
Cleaning the drain pump filters
The washing machine fails if the drain pump filter
is clogged. Periodically clean the drain filter to
prevent clogging with foreign objects.
1
Pull out the plug to turn off the
washing machine.
2
Open the drain pump filter cover.
3
Unclip the drain hose and remove the plug
from the drain hose to drain the remaining
water.
4
Twist the pump filter counterclockwise to
remove.
5
Clean the pump filter and opening.
6
Recap the plug onto the drain hose and
reattach the drain hose.
7
Insert the drain pump filter.
8
Close the drain pump filter cover.
WARNING
• Make sure to pull out the plug before
Cleaning. Failure to do so may cause
electric shock.
• Opening the drain filter will result in water
overflowing if there is water in the washer
tub. Make sure to check if the water is
completely drained before opening the
drain filter.
• If you use the washing machine with the
drain filter reassembled incorrectly after
cleaning it or with no filter, it may cause
leaks or malfunction of the machine.
NOTE
•
message will blink when the drain
Pump filter is clogged with dirt. Clean the
Drain pump filter.
Advertisement
Table of Contents
