Go to
https://support.lenovo.com/partslookup
part:
LCD module
Remove the camera module
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD unit" on page 37
"Remove the strip cover" on page 39
"Remove the hinge rubber" on page 40
"Remove the LCD module" on page 40
Step 1.
Remove the camera aluminum (AL) foil.
Figure 24. Remove the camera AL foil
Step 2.
Turn over the camera.
Figure 25. Turn over the camera
Step 3.
Disconnect the EDP cable from the camera and then remove the camera.
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
41