Advertisement
Table of Contents
User's
Chapter 3:BIOS
3.1 CMOS Setup Utility
This Main Menu can display all the major option's setting and the users
are allowed to set any option as he prefers.Take the setting of "Standard
CMOS Features" for example. The setting steps are:
(1)Shift to the item you want.
(2)Press <Enter>, a menu will immediately popping up on your screen.
(3)Move to the item such as "Drive A" and press <Enter>.
(4)Pressing <PageUp> or <PageDown> key, you will see such as EGA/
VGA, CGA 40, CGA 80, MONO.
(5)Shift to the item you want to set and press <Enter>.
(6)Press <Esc> to return to Main Menu.
(7)Shift to <SAVE & EXIT SETUP> and press <Enter>.
(8)Choose <Y> to save the data you renewded and Reboot.
Thus you will be able to load your new settings.
15
Advertisement
Table of Contents
Related Manuals for Sceptre SC7M41
Summary of Contents for Sceptre SC7M41
-
Page 1: Cmos Setup Utility
User’s Chapter 3:BIOS 3.1 CMOS Setup Utility This Main Menu can display all the major option’s setting and the users are allowed to set any option as he prefers.Take the setting of “Standard CMOS Features” for example. The setting steps are: (1)Shift to the item you want. -
Page 2: Standard Cmos Setup
User’s 3.2 Standard CMOS SETUP Date/Time The options are used to set the correct date and time. Primary/Secondary Master/Slave The options :Auto,Normal,LBA,LARGE. Drive A/B: The options :1.44M,3.5 in.(Default) , None , 360K,5.25in. , 720K,3.5in. , 2.88M,3.5in. Video: The options : EGA/VGA(Default), CGA/40, CGA 80, MONO. Halt On: The options :All Errors(Default), No Errors, All, But Keyboards, All, But Keyboard, All,But Diskette, All,But Disk/...
Need help?
Do you have a question about the SC7M41 and is the answer not in the manual?
Questions and answers