Table of Contents
Advertisement
Enable Linked Alarm Output, check Alarm Output 1 or Alarm Output 2, and set the alarm
output status for the target event.
7.5.9 Access Control Settings
Set Authentication Parameters
Click Configuration → Access Control → Authentication Settings .
Note
The functions vary according to different models. Refers to the actual device for details.
Click Save to save the settings after the configuration.
Terminal
Choose Entrance or Exit for settings.
Terminal Type/Terminal Model
Get terminal description. They are read-only.
Enable Authentication Device
Enable the authentication function.
Authentication
DS-K3BC430LX Series Swing Gate
Figure 7-8 Set Authentication Parameters
38
Advertisement
Table of Contents
