Settings - Toshiba 43 UF3D Series Operating Instructions Manual

High. Highlight your desired setting then press
Select.
DI Film Mode: Compensates interlaced inputs for
best image and motion quality. DI Film mode has 2
setting Auto and Off. Highlight your desired setting
then press Select.
Blue Stretch: Changes white balance of mid-high
gray levels to cooler colour temperature. Blue
Stretch can be switched On or Off.
PC Mode: PC Mode can be switched On or Off.
HDMI RGB Range (HDMI input only): Sets correct
interpolation method for HDMI input signals. HDMI
RGB Range has 3 different settings; Auto, Full,
Limit. Highlight your desired setting then press
Select.
HDMI Input Mode (HDMI input only): HDMI Input
Mode has 4 different settings; Mode 1 (1.4), Mode
2 (2.0), Auto, Reset. Highlight your desired setting
then press Select.
Dolby Vision Notification: Dolby Vision notifications
can be switched On or Off. Notifications are switch
on as default.
Reset to Default: Resets all setting to factory default

settings.

Adjusting the Audio Settings
Allows you to adjust the sound settings on your TV. You
can access the sound settings menu via the Settings
menu on the main screen or by pressing and holding
the Home button for 2 seconds while viewing any input.
Accessing Audio Settings via Settings Menu
Press the Home button, scroll to Settings tab. Scroll to
Display & Audio option and press the Select button.
Scroll down to Audio Settings option and press the
Select button. The sound setting options will appear
on the right hand side of the screen.
Accessing Audio Settings while watching the TV
While watching the input that you would like to adjust
press and hold the Home button for 2 seconds. The
quick settings menu will appear on the right hand side
of the screen. Scroll down and highlight Sound then
press Select. The sound setting options will appear
on the right hand side of the screen.
Audio Menu Content
The following options show all the available sound
setting adjustment on your TV.
Dolby Mode: Dolby Audio has preset sound settings.
The default setting is Smart. The available options
are Film, News, Music, Smart and Off. They are
designed to give you the best sound quality for the
content that you are viewing. If you select Smart this
will automatically detect the content you're watching
and adjust the audio settings accordingly. Highlight
your desired setting then press Select.
DTS Mode: This setting can only be accessed if
Dolby Mode has been switched off. DTS Mode has 6
different setting Standart, Music, Film, Clear Voice,
Enhanced Bass and Flat. The default setting is
Standart. Highlight your desired setting then press
Select.
Advanced Settings: Here you will be able to switch
Dialogue Clarity, TruVolume and DTS Virtual:X on
or off. Highlight the desired option and press Select to
switch on or off. You can also configure your Equaliser
and Balance settings.
Dialogue Clarity: Enhances signal clarity for clear
dialogue that is audible above background sound
effects.
TruVolume: Provides a consistent and comfortable
volume level across content.
DTS Virtual:X: Reproduces elevated sounds and a
cinematic surround sound image without surround
speakers.
Speaker Virtualiser: This setting will only be
available if the Dolby Mode option is not set to Off.
Off, Surround Virtualiser and Dolby Atmos options
will be available.
Volume Leveller: This setting will only be available
if the Dolby Mode option is not set to Off. Allows
you to balance the sound levels. Off, Low, Mid, and
High options will be available.
Balance: Adjusts the sound level from the left and
right speakers and can be adjusted from -25 to 25.
The default setting is 0.
Equaliser: This setting can only be accessed once
Dolby Mode has been switched off. Equaliser has
5 different settings: 100Hz, 500Hz, 1.5kHz, 5kHz,
10kHz. Each setting can be adjusted from -10 to 10,
the default setting is 0 for all.
TV Speakers: Press Select to switch the TV speaker
On or Off.
Reset: Resets all setting to factory default settings.
Settings
If you need to change or adjust anything on your TV
you'll be able to find the required setting in the Settings
menu. You can access the Settings menu from the
main screen of the TV. Press the Home button and
scroll across to Settings. The settings menu is split
into separate menus to make it easy for you to find
what you're looking for.
English - 12 -