Customising Tv Settings - Toshiba 43 UF3D Series Operating Instructions Manual

If the channel installation is not completed or the TV is
connected to a network with internet access, the On
Now row will not be available.

Customising TV Settings

Adjusting the Picture Settings
Allows you to set your preferred picture settings. You
can access the picture settings menu via the Settings
menu on the main screen or by pressing and holding
the Home button for about 2 seconds while viewing
any input.
Accessing Picture Settings via Settings Menu
Press the Home button, scroll to Settings tab. Scroll to
Display & Audio option and press the Select button.
Highlight the Picture Settings option and press the
Select button. Scroll down to select the input that you
want to adjust the picture setting of and press Select
button. The TV will now change to the selected input.
The Picture Settings menu will appear on the right
hand side of the screen.
Accessing Picture Settings while watching the TV
While watching the input that you would like to adjust
press and hold the Home button for 2 seconds. The
quick settings menu will appear on the right hand side
of the screen. Scroll down and highlight Picture then
press Select. The picture setting options will appear
on the right hand side of the screen.
Picture Menu Content
The following options show all the available picture
setting adjustment on your TV.
Picture settings are input-specific and all of these
settings will not apply to all Inputs. Some options may
not be available depending on the input source.
Picture Mode: Set the picture mode to suit your
preference or requirements. Picture mode can be set
to one of these options: Standard, Vivid, Sport, Film
and Game. You can also manually adjust each mode.
Available options may differ depending on the currently
set input source.
Auto Backlight: Set the Auto backlight to Off, Low,
Medium, High.
Brightness: Increases or decreases the picture
brightness from 0 - 100.
Contrast: Adjusts the difference between light and
dark levels in the picture. The range is from 0-100.
Colour: Adjusts the difference between light and dark
levels in the picture. The range is from 0-100.
Sharpness: Adjusts the level of crispness in the edges
between light and dark areas of the picture. Range
is from 0-20.
Colour Temperature: The colour temperature setting
has 4 preset settings: User, Cool, Standard, Warm,
When selected each of these settings has individual
adjustments. Red, Green and Blue gain can all be
adjusted from -20 to 20.
Picture Format: The picture format can be set to
Automatic, Superzoom, 4:3, Film Expand 14:9, Film
Expand 16:9, Wide Screen and Full.
Advanced Picture Settings
Hue: Increases or decreases the picture hue from
-50 (reds) to 50 (greens).
Gamma: Choose from Middle, Bright (standard)
or Dark (film). Highlight your desired setting then
press Select.
Motion Processing: Off, Low, Medium and High
options will be available. Highlight your desired
option then press Select.
De-contour: Decreases the contour effects in low-
resolution content and auto streaming services.
Choose from Off, Low, Middle and High. Highlight
your desired setting then press Select.
Gamut Mapping: Highlight Gamut Mapping and
press Select. Off and Auto options will be available.
Highlight your desired option then press Select.
Colour Tuner: Colour Tuner can be switched on
and off by selecting Enable option On or Off. Then
you have 5 separate setting that can be individually
adjusted. Hue, Saturation, Brightness, Offset,
Gain.
11 Point White Balance Correction: Sets white
balance of input image between cool or warm. 11
Point White Balance Correction can be switched on
and off by selecting Enable option On or Off. Then
you have 4 separate setting that can be individually
adjusted. Gain, Red, Green, Blue. Gain can be
adjusted from 5% to 100%, highlight your desired
setting then press Select. Red, Green and Blue can
be adjusted from 0 - 100, the default setting is 50.
Dynamic Noise Reduction: Dynamic Noise
Reduction has 5 different setting Off, Low, Medium,
Strong, Auto. Highlight your desired setting then
press Select.
MPEG Noise Reduction: MPEG Noise Reduction
has 4 different setting Off, Low, Medium, Strong.
Highlight your desired setting then press Select.
Adaptive Luma Control: Makes higher depth
impression by enhancing dark and bright areas.
Adaptive Luma Control has 4 different setting Off,
Low, Medium, Strong. Highlight your desired
setting then press Select.
Local Contrast Control: Divides each frame to
small regions and applies independent contrast
curves for every distinct region. Local Contrast
Control has 4 different setting Off, Low, Medium,
English - 11 -