Timer Recording - Fisher FVH-E321 Operating Instructions Manual

TIMER RECORDING

PAUSE
REW FF
PLAY
STOP
ENTER
MENU
CLK/COUNT
CH
TRACK
CLEAR
VOL TV CH TV CH
VOL
TV POWER
TV INPUT
TUNING MENU
AUTO CHANNEL SET
TUNING BAND: TV
CH. ADD/DEL: CH. 2 ADD
SOURCE SELECT: TUNER
SELECT ADJUST
TO EXIT PRESS
MAIN MENU
CLOCK
PROGRAM
TUNING
SETUP
SELECT ENTER
TO EXIT PRESS
PROGRAM 1
MONTH :
DAY :
START :
STOP :
CHANNEL :
SPEED :
REPEAT :
SELECT ADJUST
TO EXIT PRESS
PROGRAM 1
MONTH : JULY
DAY :
START :
STOP :
CHANNEL :
SPEED :
REPEAT :
SELECT ADJUST
TO EXIT PRESS
26
This VCR can be programmed to record up to 8 programs with-
in a period of 1 year. For unattended recording, the timer needs
to know the channels to be recorded and the starting and end-
ing times.
Things to know before starting
• If you try to set the program timer before setting the clock,
PLEASE SET THE CLOCK appears for a moment and then
CLOCK menu appears on the TV screen. Set the time and
date before proceeding.
• The display contents will be automatically replaced by TV
programs after 3 minutes.
• Make sure a tape is in the VCR and the safety tab is in place
or the tape will be automatically ejected.
PREPARATION
• Turn on the power of both the VCR and the TV.
• Be sure the TV is set to the VCR output channel (3 or 4).
• Make sure the TUNING BAND in the TUNING menu is set
appropriately (TV or CATV) (see illustration left).
1
Press MENU and the MAIN menu will appear.
2
Press D D or E E to choose the PROGRAM menu.
3
Press ENTER to enter the PROGRAM menu.
The PROGRAM menu will appear.
• If all programs have already been entered, FULLY PRO-
GRAMMED message will appear for a moment and then
PROGRAM 1 will appear on the TV screen.
4
Press F F or G G to choose the PROGRAM No. (1-8).
5
Press E E to choose the MONTH item.
Press F F or G G to choose the desired month.
Example: JULY