WITH THESE INSTRUCTIONS. company. Should a shortage be evident on receipt, 1.2 - WARNING notify EBSRAY immediately giving full details and packing note number. THESE VALVES MUST BE OPERATED WITHIN ORIGINAL SELECTED DESIGN 1.5 STORAGE...
SECTION 3 - OPERATION The EBSRAY Model RV26 BYPASS VALVE is a The RV26 Valve is available in various configurations spring actuated pump and system protection device including 'O'Ring sealed or Gasket sealed versions, that by design cannot be positively shut-off. With the...
Apply loctite (High temperature GASKET SEALED VERSIONS ONLY: retaining compound) or equivalent to Spring Place Spring Cap (4) on Spring(5). Retainer thread. Carefully screw in Spring Retainer (16) With a new 'O'ring or gasket in place, fit Valve ensuring that Spring (13) enters the bore of Cover (2).
SERIOUS INJURY TO PERSONNEL AND/OR DAMAGE TO EQUIPMENT MAY OCCUR IF SYSTEM OR COMPONENT DESIGN PRESSURE IS EXCEEDED. SHOULD THERE BE ANY DOUBT AS TO THE PRESSURES LIKELY TO BE GENERATED IN THE SYSTEM WITH AN INOPERATIVE OR INCORRECTLY SET BYPASS VALVE, PLEASE CONTACT EBSRAY FOR MORE INFORMATION. NOTE In order to set the bypass valve, a throttling valve must be located in the discharge line downstream of the bypass valve.