Channel Scan Memory; Adding Channels To Scan Memory; Deleting Channels From Scan Memory - Sanyo DP26648 Owner's Manual

CHANNEL SCAN MEMORY

Channel Scan Memory is a database of active
channels you scan through using the CHANNEL
LM keys. Customize it by deleting or adding
channels.
1 Press the MENU key on the remote control to
display the Main menu. (See page 7.)
Use the CURSOR LM keys to highlight
2
Chanel Scan Memory. Press ENTER.
A C
DDING HANNELS TO
3 Use the NUMBER keys to select the channel
you want to Add.
NOTE: Use the 1– – key to select cable channels above
99.
4 Press ENTER to Add the channel to Channel
Scan Memory.
This Display
appears after
you press
ENTER
.
After 3 seconds the TV screen will display "Delete?"
S M
CAN EMORY
Need help?
D C
ELETING
Use the CHANNEL LM or NUMBER keys to
3
select the channel you want to Delete.
NOTE: Use the 1– – key to select cable channels above
99.
4 Press ENTER to Delete the channel from
Channel Scan Memory.
5 Press EXIT to return to normal TV viewing.
Channel Scan
Memory Screens
This Display
appears after
you press
ENTER
.
After 3 seconds the TV screen will display "Add?"
IMPORTANT FACTS: When a digital channel is deleted,
all of that channel's sub-channels are deleted as well.
Only previously deleted digital channels can be added
back to the Channel Scan Memory.
Tune to "deleted" channels using the number keys.
If one digital sub-channel is added back to the Channel
Scan Memory list, all of that channel's sub-channels will
be added back.
www.sanyoctv.com
Visit our Web site at
S
HANNELS FROM CAN
(Menu operations continued on page 14.)
1-800-877-5032
or Call
M
EMORY
13