Servicing The Appliance - Russell Hobbs RHS02 Warranty And Instructions

•
Do not use any abrasive cleaning agents on the ceramic coated plates as
this will damage the surface and the effectiveness of the plates. The
warranty does not cover misuse.
•
Avoid wrapping the cord around the unit as this will, with time, cause damage
to the power cord.

SERVICING THE APPLIANCE

There are no user serviceable parts in this appliance. If the straightener is not
operating correctly, please check the following:
•
You have followed the instructions correctly
•
That the unit has been wired correctly and that the wall socket is
switched on.
•
That the mains power supply is ON.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve
the problem and you need to return the appliance, make sure that:
•
The unit is packed carefully back into its original packaging.
•
Proof of purchase is attached.
•
A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an
authorized service agent, in order to avoid any hazard. If service becomes necessary
within the warranty period, the appliance should be returned to an approved
Amalgamated Appliance (Pty) Ltd service centre. Servicing outside the warranty
period is still available, but will, however, be chargeable.
CHANGING THE PLUG
Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on 220 - 240V current only. Connecting to other power
sources may damage the appliance. Connect a three-pin plug as follows:
The wires in this mains lead are
coloured in accordance with the
following code:
6