Advertisement
CLEANING AND MAINTENANCE
•
This appliance is for household use only and is not user-serviceable.
•
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
•
Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the controls are set to "0".
•
It is much easier to clean the accessories directly after they have been used.
Wash them in warm, soapy water, rinse and dry well.
•
The body of the appliance and the stand should be cleaned with a damp cloth.
Do not let water enter the appliance or the stand.
•
Do not use bleach or other abrasive substance or solvents to clean your
appliance as it can be damaging to the finish.
•
Do not immerse the unit in water or any other liquid, or hold it under a running tap
to clean.
•
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,
dry, soft cloth.
STORING THE APPLIANCE
•
Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
•
Store the appliance in its box or in a clean, dry place.
•
Never store the appliance while it is still wet or dirty.
•
Never wrap the power cord around the appliance.
SERVICING THE APPLIANCE
There are no user serviceable parts in this appliance. If the unit is not operating
correctly, please check the following:
•
You have followed the instructions correctly
•
That the unit has been wired correctly and that the wall socket is switched on.
•
That the mains power supply is ON.
•
That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the
problem and you need to return the appliance, make sure that:
•
The unit is packed carefully back into its original packaging.
•
Proof of purchase is attached.
•
A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised
service agent, in order to avoid any hazard. If service becomes necessary within the
warranty period, the appliance should be returned to an approved Amalgamated
5
Advertisement
