Installing The Front Bezel; Hard-Drive Assembly; Removing The 2.5 In. Hard Drive Assembly - Dell OptiPlex 5080 Service Manual

Installing the front bezel

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the front bezel and provides a visual representation of the installation procedure.
Steps
1. Position the bezel to align the tab holders with the slots on the system chassis.
2. Press the bezel until the tabs click into place.
Next steps
1. Install the side cover.
2. Follow the procedure in after working inside your computer.

Hard-drive assembly

Removing the 2.5 in. hard drive assembly

Prerequisites
1. Follow the procedure in before working inside your computer.
18 Field service information