Cleaning And Maintenance - Russell Hobbs RHCT06 Instructions And Warranty

Russell hobbs pro curling tong
Table of Contents

Advertisement

OPERATING INSTRUCTIONS
1. Ensure that your hair is completely dry before use.
2. Plug in the curling iron and place on a smooth, dry and flat surface.
3. Press the "ON/OFF" switch to turn on the appliance.
4. Press the "+"/"-" buttons to set the desired temperature. Press "+" to increase the
temperature by 20℃ increments. The maximum temperature is 200℃.
5. Press the "-" button to reduce the temperature in 20℃ increments. The minimum
temperature is 120℃
6. Section dry hair evenly and comb each section before curling it. Press the spring
grip. Place the curling iron midway up the hair section chosen and then spread the
hair evenly between the spoon and the barrel. Release the spring grip to hold the hair
in place. Gently slide the curling iron down to the hair ends. To avoid crimped ends,
make sure the ends are securely wound under the spoon in the same direction as the
desired curl.
7. Remember, always place the spoon above the hair strand when doing a flip style and
do not let the iron touch your scalp.
8. Hold in place for a few seconds depending on the texture and length of the hair. For
tighter bouncier curls, roll less hair. For looser free flowing curls, roll more hair.
9. To remove the curling iron, unwind the hair and press the spring grip. To set the curl,
do not comb or brush hair until it has cooled down.
10. Repeat process with the rest of the sections of hair.
11. Unplug once you have finished the styling process.
12. If the heat setting of the appliance is not changed after an hour the appliance will
automatically shut off.
13. After use press the "ON/OFF" switch to turn it off.
14. Once the curling iron has completely cooled, clean it with a soft cloth. Do not use
chemical cleaners.

CLEANING AND MAINTENANCE

Before cleaning the appliance, it must be switched off and unplugged.
This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
5

Advertisement

Table of Contents
loading

Table of Contents