Dell OptiPlex 5080 User Manual page 4

1
Dell OptiPlex Small Form Factor Cable Cover
The cable cover for the Dell OptiPlex Small Form Factor system helps protect the ports and cables that are connected to the
system.
About this task
Follow these steps to install the cable cover.
NOTE: Images that are shown below may vary depending on your system configuration.
Steps
1. Route the cables through the slot at the bottom of the cable cover.
2. Draw out the cables from the other side of the cable cover.
3. Connect the cables to their respective ports and turn the antenna (if available/applicable) outwards to pass through the
antenna slot at the top of the cable cover.
4 Dell OptiPlex Small Form Factor Cable Cover