Safety Precautions Important Safeguards 13. Servicing Do not attempt to service this equipment yourself. Refer all servicing to 1. Read Instructions qualified service personnel. All the safety and operating instructions should be read before the 14. Damage requiring Service appliance is operated. Unplug this equipment from the wall outlet and refer servicing to qualified 2.
Costar Video Systems reserves all rights concerning this document. Use or duplication of this document in part or whole without the prior consent of Costar Video Systems is strictly prohibited. Contents of this document are subject to change without prior notice for reasons such as functionality enhancements.
Accessories Upon unpackaging the product, check the contents inside to ensure that all the following accessories are included. Item XDi Series Power Cable Quick Guide Manual and iRAS Program CD Optical USB Mouse IR Remote Control Assembly Screws for Adding Hard Disk Drives Rack-mount Kit SATA2 Cables Overview...
Page 5
Connections on the Rear Panel Microphone Speaker VGA Monitor Sensor HDMI Monitor eSATA Storage Network Camera Device Video Encoder Network Analog Camera Gigabit PoE Switch iRAS Remote Camera Monitoring Keyboard Alarm Power...
Camera Scan Button Network Setup Wizard Use this button to scan for and register cameras. After exiting from Quick Wizard, the network with Pressing the Search button displays the following Network Wizard will start automatically. submenu: ● Start the Network Setup Wizard ●...
Login Camera List Area Following options can be accessed by right-clicking on a Configuring the NVR's settings and accessing its searching camera list entry: and other functions require an authorized user login. ● Add/Remove Camera: Adds or removes the selected While in Live mode, right-click on the mouse and camera.
All Channel Playback Basic Feature Press the Menu button while in Live mode. icon and then select Time- Select the Search Mode Live Mode Lapse Search or Event Log Search. The selected search mode will be initiated. Once Camera Registration is complete, the system will enter Live Mode.
Selecting the Use DVRNS option on the login window On Microsoft ® Windows ® Vista or User allows you to enter the NVR name registered to Account Control window may pop-up. the FEN server instead of its IP address. You will be Click Allow and follow the instructions in prompted to enter the FEN server’s address and port the installation window to proceed with the...
Click Device Group on the Sites panel and click • Default User ID is "admin" without a password. the bottom. Add Device Group window will appear. • You can change User ID and Password in the User menu. Device Registration To use the functions provided by iRAS, you must first register a device and add the device to a device group.
Recorded Video Playback – Address, Watch Port: Enter the device name used to register the device to FEN. If FEN feature is not enabled on the device, deselect FEN checkbox In the Site List, make sure that the device has been and enter the device’s IP address.
Monitor Out HDMI: 1 HDMI, VGA: 1 DB15 1920x1200, 1920x1080, 1680x1050, Video Resolution 1600x1200 Up to 480ips @ HD (CR1600XDi,CR3200XDi) Recording Speed (IPS) Up to 240ips @ HD (CR8000XDi) Playback Speed (IPS) 120ips @ Full HD * If more than 16 cameras from video encoders are registered on the NVR, video may not be displayed smoothly in a remote program.
Page 14
COSTAR VIDEO SYSTEMS 101 Wrangler, Suite 201 Coppell, Texas 75019 Phone: (469) 635-6800 Fax: (469) 635-6822 Toll-free: (888) 694-7827...
Need help?
Do you have a question about the CR1600XDi and is the answer not in the manual?
Questions and answers