Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Costar CR6420XDi
Summary of Contents for Costar CR6420XDi
- Page 1 Network Video Recorder Quick Guide CR6420XDi...
-
Page 2: Safety Precautions
Safety Precautions Important Safeguards 13. Servicing Do not attempt to service this equipment yourself. Refer all servicing to 1. Read Instructions qualified service personnel. All the safety and operating instructions should be read before the 14. Damage requiring Service appliance is operated. Unplug this equipment from the wall outlet and refer servicing to qualified 2. -
Page 3: Fcc Compliance Statement
Costar Video Systems reserves all rights concerning this document. Use or duplication of this document in part or whole without the prior consent of Costar Video Systems is strictly prohibited. Contents of this document are subject to change without prior notice for reasons such as functionality enhancements. -
Page 4: Front Panel
Accessories Upon unpackaging the product, check the contents inside to ensure that all the following accessories are included. Item Network Video Recorder Power Cable Quick Guide Manual and StartNET Program CD Optical USB Mouse IR Remote Control Overview Front Panel Panic Recording SATA LED Status LEDs... - Page 5 Connections on the Rear Panel Power Network Camera Gigabit PoE Switch Network eSATA Storage Microphone Camera Network Device Sensor StarNET Remote Speaker Monitoring Keyboard Alarm VGA Monitor HDMI Monitor...
-
Page 6: Remote Control
Remote Control ID Button Panic Button Camera Buttons Status Button Layout Button PTZ Control Buttons Register Mode Button Thumbnail Button Calendar Button Keylock Button Setup Button Freeze Button Log Button Enter Button Arrow Buttons Alarm Button Sequence Button Zoom Button &... -
Page 7: Camera Registration
● H.265 Camera Codec Camera Registration Setup Once Network Setup Wizard is complete, the system will automatically enter Camera Registration mode and scan for cameras connected to the NVR. ● Finish the Quick Setup Wizard Network Setup Wizard After exiting from Quick Wizard, the network with Network Wizard will start automatically. -
Page 8: Apply/Cancel Buttons
– Mode: Select the scan mode. – Advanced Setup: If the camera is networked but not scanned, use this setup. This setup allows you to change the network setting of the NVR’s VIDEO IN port which is camera’s network environment. Check the camera’s network setting first before you use this setup. -
Page 9: Basic Feature
All Channel Playback Basic Feature Press the Menu button while in Live mode. icon and then select Time- Select the Search Mode Live Mode Lapse Search or Event Log Search. The selected search mode will be initiated. Once Camera Registration is complete, the system will enter Live Mode. -
Page 10: System Requirements
Selecting the Use DVRNS option on the login window On Microsoft ® Windows ® Vista or User allows you to enter the NVR name registered to Account Control window may pop-up. the FEN server instead of its IP address. You will be Click Allow and follow the instructions in prompted to enter the FEN server’s address and port the installation window to proceed with the... -
Page 11: Device Registration
Click Device Group on the Sites panel and click • Default User ID is "admin" without a password. the bottom. Add Device Group window will appear. • You can change User ID and Password in the User menu. Device Registration To use the functions provided by StarNET, you must first register a device and add the device to a device group. -
Page 12: Recorded Video Playback
Recorded Video Playback – Address, Watch Port: Enter the device name used to register the device to FEN. If FEN feature is not enabled on the device, deselect FEN checkbox In the Site List, make sure that the device has been and enter the device’s IP address. -
Page 13: Specifications
Specifications INTERFACE Local(NVR) : 1 RCA / 1RCA + 1HDMI These product specifications may change without prior Audio In / Out IP Camera : 64 / 64 (Depending on IP notice. Camera) 4 TTL, NC/NO programmable, 2.4V (NC) NVR Alarm Spec- In VIDEO or 0.3V (NO) threshold, 5V DC Video Inputs... - Page 14 COSTAR VIDEO SYSTEMS 101 Wrangler, Suite 201 Coppell, Texas 75019 Phone: (469) 635-6800 Fax: (469) 635-6822 Toll-free: (888) 694-7827...
Need help?
Do you have a question about the CR6420XDi and is the answer not in the manual?
Questions and answers