Axis P3905-R Mk III User Manual page 34

AXIS P3905–R Mk III Dome Camera
The device interface
• Encrypt: Use this tool to format the SD card and enable encryption. Encrypt deletes all data stored on the SD card.
After using Encrypt data that's stored on the SD card is protected using encryption.
• Decrypt: Use this tool to format the SD card without encryption. Decrypt deletes all data stored on the SD card. After
using Decrypt data that's stored on the SD card is not protected using encryption.
• Change password: Change the password required to encrypt the SD card.
Click Use tool to activate the selected tool.
Wear trigger: Set a value for the SD card wear level at which you want to trigger an action. The wear level ranges from 0–200%.
A new SD card that has never been used has a wear level of 0%. A wear level of 100% indicates that the SD card is close to
its expected lifetime. When the wear-level reaches 200% there is a high risk of the SD card malfunctioning. We recommend
setting the wear trigger between 80–90%. This gives you time to download any recordings as well as replace the SD card in
time before it potentially wears out. The wear trigger allows you to set up an event and get a notification when the wear
level reaches your set value.
Stream profiles
Click to create and save groups of video stream settings. You can use the settings in different situations, for example
in continuous recordings or when you use rules to record.
ONVIF
ONVIF users
ONVIF (Open Network Video Interface Forum) is a global interface standard that makes it easier for end-users, integrators,
consultants, and manufacturers to take advantage of the possibilities offered by network video technology. ONVIF enables
interoperability between different vendor products, increased flexibility, reduced cost and future-proof systems.
When you create an ONVIF user, you automatically enable ONVIF communication. Use the username and password for all ONVIF
communication with the device. For more information see the Axis Developer Community at axis.com.
Add user: Click to add a new ONVIF user.
Username: Enter a unique username.
New password: Enter a password for the user. Passwords must be 1 to 64 characters long. Only ASCII printable characters (code
32 to 126) are allowed in the password, for example letters, numbers, punctuation, and some symbols.
Repeat password: Enter the same password again
Role:
• Administrator: Has full access to all settings. Administrators can also add, update, and remove other users.
• Operator: Has access to all settings except:
-
-
• Media user: Allows access to the video stream only.
The context menu contains:
Update user: Edit the user's properties.
Delete user: Delete the user. You can't delete the root user.
ONVIF media profiles
All System settings.
Adding apps.
34