Advertisement
Contents
Connections
Tuning in by entering the frequency
(Direct Tune)
You can enter the receiving frequency directly to tune in.
1
Press OPTION during FM reception.
The option menu screen is displayed.
2
Use cursor Up/Down to select "Direct Tune", then
press ENTER.
The screen that lets you enter the frequency is displayed.
3
Use cursor Up/Down to select a number, then press
cursor Right.
If cursor Left is pressed, the immediately preceding input is
0
cancelled.
4
Repeat step 3 and enter the frequency of the radio
station you want to hear.
5
When setting is completed, press ENTER.
The preset frequency is tuned in.
Front panel
Display
Playback
Settings
RDS Search
RDS is a broadcasting service which allows a station to send additional
information along with the regular radio program signal.
Use this function to automatically tune to FM stations that provide the RDS
service.
Note that the RDS function only works when receiving RDS compatible
stations.
1
Press OPTION during FM reception.
The option menu screen is displayed.
2
Use cursor Up/Down to select "RDS Search", then
press ENTER.
3
Press ENTER.
The search for RDS stations begins automatically.
0 If you use cursor Left/Right within 5 seconds after the broadcast station name is
shown on the display, you can search for a different station.
69
Rear panel
Tips
Remote
Index
Appendix
Advertisement
