Advertisement
2.
INTRODUCTION
Compact, lightweight cordless polisher. Comfortable composite housing with soft grip to reduce vibration. 2-Speed settings and variable
speed control trigger make this polisher easy-to-use. Integral LED battery level indicator. Supplied with side handle, two foam pads and
one wool polishing pad. Requires Model No. CP1200BP 12V 1.5Ah Lithium-ion Battery and Model No. CP1200MC Battery Charger.
3.
SPECIFICATION
Model No: .......................................................... CP1205
Battery Options (not included): ..... 12V 1.5Ah Lithium-ion
........................................................ 12V 3Ah Lithium-ion
........................................................ 12V 4Ah Lithium-ion
Noise Power/Pressure: ................................. 90/79db(A)
No-Load Speed: ...........................0-2500rpm/0-7500rpm
Pad Size: ........................................................... Ø71mm
Replacement Parts:............ CP1200MC - Mains Charger
Thread Size:.....................................................5/16"UNF
Vibration/Uncertainty: ................................ 4.213/1.5m/s²
4.
OPERATION
WARNING! Before use, ensure that you have read and
‰
understood Section 1 Safety Instructions.
4.1.
USING THE POLISHER
4.1.1. To attach/remove the applicator pad depress the chuck lock button behind the chuck (fig.1) and screw/unscrew the applicator pad.
4.1.2. Release the chuck lock button and check that applicator pad is locked into chuck before switching on.
4.1.3. Attach the battery to the sander. The battery charge level indicator LEDs (fig.1) show charge (three green lights indicate full charge).
4.1.4. Set the required speed by use of the speed selector switch (fig.1).
4.1.5. Unlock the drive mechanism by use of the slide switch (fig.1).
4.1.6. Grip the side handle (not shown) and start the polisher by gentle and slow application of pressure on the trigger (fig.1).
4.1.7. Increase/decrease the speed of the polisher using the variable speed control trigger (fig.1) to suit the task.
4.1.8. Ensure that the above features are working correctly prior to use.
5.
MAINTENANCE
WARNING: Always disconnect the battery before carrying out any inspection, maintenance or cleaning.
‰
5.1.
GENERAL
5.1.1. Regularly check that all the fixing screws are tight.
5.1.2. Repairs should only be carried out by an authorised service centre.
5.2.
CLEANING
WARNING: Always wear protective equipment including eye protection and gloves when cleaning this tool.
‰
5.2.1. Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly, and shorten the device's service life.
5.2.2. Clean the body of your machine with a soft brush, or dry cloth.
5.2.3. Never use caustic agents to clean plastic parts. If dry cleaning is not sufficient, a mild detergent on a mildly damp cloth is recommended.
5.2.4. Water must never come into contact with the tool. Ensure the tool is thoroughly dry before using it.
5.2.5. If available, use clean, dry, compressed air to blow through the ventilation holes (where applicable).
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic
Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact
your local solid waste authority for recycling information.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved
containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.1
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
CP1205
Issue 3 (ALL)
REGISTER YOUR
PURCHASE HERE
13/06/23
Advertisement
