Meter Functions - Cooper Lighting Sure-Lites Lifeway II Series User Manual

Control Panel Keypads
Table 5.1 Keypad Functions
Key Name
Meter (Blue)
Control (Red)
Program (Black)
Enter (Grey)
[ ◄ ]
[ ► ]
[ 0 ]
[ 1 ] through [ 9 ]

Meter Functions

Meter functions are available by pressing the METER keypad to get to the Meter
Menu and then pressing the desired function keypad. (See figure 5.1)
Table 5.2 Meter Functions
Function
Voltage Input
Voltage Output
Current Output
Battery Voltage
Battery Current
VA Output
Inverter Watts
Inverter Minutes Total minutes the system has run on inverter
Temperature
System Days
10
Pressing this key will activate Meter Functions
Pressing this key will activate Control Functions
Using this key, you can enter passwords or change parameter values. To
enter passwords, press [PROGRAM], enter the password, and press
[ENTER]. NOTE: A password must be entered to change parameters.
This key records or enters a task you perform using the control panel
keys.
This key functions as Left scroll key
This key functions as Right scroll key
This key works as a number key; it is also used to display active alarms
when in CONTROL Mode.
These keys work as number keys.
Description
Measures the AC Input Voltage to the Inverter
Measures the AC Output Voltage from the Inverter
Measures the AC Output Current from the Inverter. If
optional Normally Off loads is connected, it will read the
sum of Normally On and Normally Off outputs.
Measures Battery Voltage
Measures the Battery Current. When in charge mode, the
current will be positive. When in Inverter mode, the current
will be negative.
Multiplication of the output voltage and output current
Multiplication of the battery voltage and the battery current
Measures the ambient temperature of the electronics
enclosure.
Total days the system has been in service.
Description
113904 – System Users Manual
Keypad Text
V IN
V OUT
I OUT
V BATT
I BATT
VA OUT
INV. WATTS
INV. MIN
TEMP
SYS. DAYS