Safety Precautions; Specifications - BorMann PRO BGT1000 Manual

EN

SAFETY PRECAUTIONS

CAUTION: Before using the blowtorch read this manual carefully and keep it for future reference.
• The blowtorch can be used only in well ventilated rooms, away from flammables and in accordance with valid regulations. The amount of air necessary for
proper burning, that allows to avoid dangerous concentration of unburnt gas, is 5 m3/h.
• With the blowtorch you can use only cartridges with pressurized butane (propane and butane) with capacity 190g. Using different cartridge may be dangerous.
• Read carefully instructions on liquid gas cartridge body before installing it in the blowtorch.
• In case of overheating, intermittent or inappropriate burning, close the blowtorch valve to avoid fire hazards (1b).
• Use the blowtorch away from flammable materials.
• Ensure the valve is closed before carrying the blowtorch (1b).
• Replace cartridge in well ventilated place, outdoors if possible, and away from open flame, heat sources, sparks and flammables. Carry out replacement
away from bystanders.
• In case of leak (when you can smell gas) close the valve and take the blowtorch to a well ventilated place, free from ignition sources, i.e. where you can
exactly define the leakage and remove it. Check tightness of the blowtorch if it is possible.
• Do not use flame to detect source of escaping gas. Use soap and water solution for this purpose.
• Do not use the blowtorch when the cartridge mount is damaged, when there is a leak or the blowtorch does not function properly.
• Do not make any unauthorized changes or improvements in blowtorch construction. Such changes may be dangerous, void all warranties and release the
manufacturer from responsibility for the product.
• Remove the gas cartridge only when it is completely emptied.
• Do not throw empty gas containers into fire.
• When using the blowtorch, and for some time after the operation is finished, the burner heats many parts of the device. Avoid touching hot parts of the
device with your hands.

SPECIFICATIONS

Technical Data
Model BGT1000
Ignition Manual
Includes ABS Handle
Main Parts
a. Seal
b. Blowtorch valve
c. Blowtorch nozzle
d. Liquid gas cartridge casing
e. Liquid gas cartridge (gas cartridge not included in the set)
f. Base for liquid gas cartridge fixing
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect
the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the
manufacturer's product line with similar features and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments,
must only be carried out by technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The
manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
2
WWW.NIKOLAOUTOOLS.GR