AUDIO IN
10
AUDIO OUT
11
5.3 IR Pin Definition
6. Rack Mounting Instruction
6.1 6U Rack Mounting
This transceiver can be mounted in a standard 6U rack (Please contact your
supplier for 6U rack sale). The mounting steps are as follows:
Step 1: Use included screws to fix two mounting ears on the transceiver, as
shown in the figure below:
Analog audio input port. Used for stereo analog audio
transmission, Secondary Stream audio embedding, HDMI
audio embedding.
Analog audio output port. Used to output HDMI extracted
stereo audio or output remote stereo analog audio signal.
IR BLASTER
IR BLASTER
IR RECEIVER
6 / 19
IR RECEIVER
+
-
Power 12V