Table of Contents
Advertisement
5. Operation Controls and Functions
5.1 Front Panel
POWER STATUS
RESET
1
2
3
No.
Name
RESET button
1
POWER LED
2
(Red)
STATUS LED
3
(Green)
LINK LED
4
(Green)
VIDEO LED
5
(Green)
USB LED
6
(Green)
ENC LED
7
(Green)
DEC LED
8
(Green)
MODE button
9
USB DEVICES
10
port
USB HOST
11
port
LINK
VIDEO
USB
ENC
DEC
4
5
6
7
8
Restore default settings button. Press and hold this button
for 5 seconds in the power-on state to restore the default
settings.
When the product is powered on, the red power LED will be
on.
System status indicator.
▪ Light on: The system is running normally.
▪ Light flashing/light off: Program firmware lacking or
hardware error.
10G network connection indicator.
▪ Light on: 10G network port is connected with device.
▪ Light off: 10G network port is not connected with device.
Video signal detection indicator.
▪ ENC mode: Indicator lighting on means video input is detected.
▪ DEC mode: Indicator lighting on means that HDMI OUT has
video signal output.
USB connection indicator.
▪ Light flashing: The product is connected with USB devices,
and there is data transmission.
▪ Light off: The product is not connected with USB devices.
When the device is in ENC mode, the ENC LED is always on.
When the device is in DEC mode, the DEC LED is always on.
Mode switch button. Press and hold the button for 5 seconds to
switch ENC or DEC mode.
USB device ports. Connect to mouse, keyboard or U Disk when
the product is in DEC mode.
USB HOST input port. Connect to PC when the product is in
ENC mode.
MODE
9
Function Description
4 / 19
USB DEVICES
USB HOST
10
11
Advertisement
Table of Contents
