Wahl 4314 Operating Instructions Manual page 9

Description of parts (Fig. 1)
A TOURMALINE coated front grill
B Removable filter for the air inlet aperture
C Cold shot button
D Switch for temperature settings
E On/off switch, fan settings
F Hanging loop
G Mains cable
H Narrow attachment nozzle
I Wide attachment nozzle
J Styling diffuser (optional accessory)
Operation
· Connect to the mains power supply.
· The hairdryer has 3 heat settings and 2 fan set-
tings that, thanks to separate switches, enable
a total of 6 temperature-fan settings. For short
periods, the cold shot button (C) can be used to
fix the hairstyle.
· Switch on the appliance at the on/off switch (E)
and select the required fan setting.
On/off switch, fan setting (E):
I Fan setting 1, for a gentle airflow
II Fan setting 2, for a strong airflow
· Select the required temperature setting on the
switch (D).
Switch for temperature settings (D):
T Temperature setting 1, for cold air
I Temperature setting 2, for hot air
II Temperature setting 3, for hotter air
Cold shot (C):
By pressing the button and keeping it
depressed, the hairdryer can be switched to
cold air for short periods. To return to the set
temperature, simply release the cold-shot
button.
· Using the on/off switch (E), switch off the appli-
ance after use.
TOURMALINE coating
Negative ions have an antistatic effect and are gen-
tle to the hair. They close the scale layer, creating a
smooth, silky hair surface and locking in the natural
moisture of the hair, thereby creating the ultimate
shine.
Styling with the nozzle
The nozzle can be used to direct the airflow onto
the styling brush.
· Position the nozzle and press it towards the
housing (Fig. 2ⓐ).
· To remove the nozzle, simply pull it off in the
direction of the arrow (Fig. 2ⓑ).
Cleaning and care
· Disconnect from the mains before cleaning the
appliance.
· Do not immerse the appliance in water!
· Only wipe the appliance with a soft cloth, which
may be dampened slightly. Do not use solvents
or abrasives!
· To maintain the performance of your hairdryer,
regularly clean the air inlet with a soft dry brush.
To do so, proceed as follows:
· Twist the cover in an anti-clockwise direc-
tion (Fig. 3ⓐ) and remove.
· Clean the cover and air inlet with a soft
brush (Fig. 4).
· Fit filter and turn clockwise until it clicks
into place (Fig. 3ⓑ).
Disposal
Adhere to the relevant legal requirements when dis-
posing of the appliance.
Information on the disposal of electrical
and electronic appliances in the European
Community:
Within the European Community, national
regulations are specified for the disposal of
electrical appliances, based on EU Waste
Electrical and Electronic Equipment Direc-
tive 2012/19/EC (WEEE). In accordance
with this, the appliance can no longer be
disposed of with the local or domestic
waste.
The appliance will be accepted free of
charge by local collection points or recycling
centres.
The packaging for this product is made
from recyclable materials. Dispose of this
in an environmentally friendly manner by
recycling it.
ENGLISH
de
en
fr
it
es
pt
nl
sv
no
fi
tr
pl
cs
sk
hu
sl
ro
bg
ru
uk
el
ar
9