Device Name - Sharp AQUOS BOARD 4W-B65FT5U Operation Manual

[ENGLISH]
Contents
1. Part Names
2. Introduction
3. Direct Button Operation
4. On-Screen Display Menu
5. Application
6. Using a PC
1. Control of the TV
PC Compatibility Chart/AV
2.
Compatibility Chart
7. Using the touch function
8. Appendix
9. Specifications
10. Trademarks
11. Dimensional Drawings
Ver. 1.1
>> Using a PC
<< Control of the TV
The TV can be controlled from a PC, control panels and other devices
using RS-232C or IP. Use a cross-type RS-232C cable. (Needs the
conversion cable to minijack (Terminal : "RS-232C") for using RS-
232C.) ETHERNET cable (commercially available) or wireless LAN for
the connections
NOTE
• The Power on function is available only with the RS-232C
connection at 9600 baud.
• Use a Wake On LAN function when using IP connection.
• When the TV is powered off via RS232C, please wait
approx. 30 seconds before sending the power on command.
IP Control
Set this function when operating the TV from equipment connected by
LAN. To perform the operation, refer to "Network Settings".
IP Control
When "IP Control" is selected, "Change" will be highlighted. Press
ENTER.
Detailed Settings
Make the detailed settings (Login ID, password, etc.).
Follow the on-screen instructions to configure these settings.

Device Name

Set the name of the TV displayed on other network devices.
• Use the software keyboard to set the name.
en-US 51