Sharp AQUOS BOARD 4W-B65FT5U Operation Manual page 49

[ENGLISH]
Contents
1. Part Names
2. Introduction
3. Direct Button Operation
4. On-Screen Display Menu
5. Application
1. MMP (Multi Media Player)
2. Casting
3. OPEN BROWSER
6. Using a PC
7. Using the touch function
8. Appendix
9. Specifications
10. Trademarks
11. Dimensional Drawings
Ver. 1.1
>> Application (Using the Internet)
<< OPEN BROWSER
Connecting to the Internet
By connecting your TV to a broadband system, you can access the
Internet from the TV.
To connect your TV to the Internet, you must have a broadband
Internet connection.
If you do not have a broadband Internet connection, consult the
store where you purchased your TV or ask your Internet service
provider or telephone company.
When an Internet connection is made, an Ethernet and wireless
connection cannot be used at the same time. Use only one of the
connection types.
Using an ETHERNET cable
Use an ETHERNET cable (commercially available) to connect
the ETHERNET terminal on the TV to your broadband router
(commercially available).
Using the wireless LAN
This TV is equipped with a wireless LAN function.
For a wireless LAN connection, you must use "Wireless Setup"
to connect the access point and TV.
Network Settings
Perform the procedure below to make adjustments or to confirm the
settings for accessing the Internet.
1. Press MENU to display the MENU screen, and then press
ENTER.
2. Press / to select "Network Setting", and then press
ENTER.
3. Press / to select "Connection Type", and then press
ENTER.
Press / select "Wired" or "Wireless". and press ENTER.
4. Press / to select "Wired Setup", or "Wireless Setup", and
then press ENTER.
Select "Wired Setup" when you make general adjustments to
connect to the Internet.
5. Press MENU to exit.
NOTE
• This TV has a built-in wireless LAN function. Using a separate
wireless USB LAN adapter may result in radio communications that
do not comply with regulations on radio communications. Therefore,
do not use a separate wireless LAN.
• A wireless LAN connection and performance cannot be guaranteed
for all residential environments. In the following cases, the wireless
LAN signal may be poor or drop, or the connection speed may
become slower.
- When used in buildings made with concrete, reinforced steel, or
metal.
- When placed near objects that obstruct the signal.
- When used with other wireless devices that emit the same
frequency.
- When used in the vicinity of microwave ovens and other devices
that emit a magnetic field, electrostatic charge, or electromagnetic
interference.
en-US 48