Daintree WWD2-4SM Installation Manual

Product Overview
The WWD2-4SM wireless dimmer is
a battery powered surface mount wall
switch for use in zonal room control. The
WWD2-4SM device installs onto an ex-
isting junction box to replace an existing
switch or directly on the wall providing a
wireless solution that enables dimming
and ON/OFF commands to be delivered
to luminaires in its commissioned space.
The communication with the luminaires
or wireless controllers utilizes a secure
and reliable wireless connection which
helps minimize installtion cost and
complexity.
Prepare Electrical Wiring
Electrical Requirements
¥ When replacing a line voltage switch, the
power must be off at the branch circuit
breaker. Bypass the line voltage switch to
provide uninterrupted power to the fixtures
and make sure the connection is properly
insulated before installing the wireless switch.
currentlighting.com
© 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
LightOWL® Dual Technology Passive Infrared
and Acoustic Sensors (LODIA)
INSTALLATION INSTRUCTIONS
.
WWD2-4SM
Installation Guide
Page 1 of 7
Rev 03/14/23
DT_WWD2-4SM_InstallSheet