Connecting To Video Equipment - Sanyo PLC-XU30 Owner's Manual

CONNECTING TO VIDEO EQUIPMENT

Cables used for connection
• Video Cable (RCA x 1 or RCA x 3)
• S-VIDEO Cable
• Audio Cable (RCA x 2)
Video Source (example)
Video Cassette Recorder
S-VIDEO Output
S-VIDEO
Use any of VIDEO jack Y-Pb/Cb-
Pr/Cr jacks or S-VIDEO jack.
• When both VIDEO jack and S-
VIDEO jack are connected, S-
VIDEO jack has priority over
VIDEO jack.
• When both Y-Pb/Cb-Pr/Cr jacks
and S-VIDEO jack are connected,
Y-Pb/Cb-Pr/Cr jacks has priority
over S-VIDEO jack.
NOTE :
When connecting the cable, the power
cords of both the projector and the external
equipment should be disconnected from
AC outlet.
( = Cable is not supplied with this projector.)
Video Disc Player
Composite
Video Output
S-VIDEO Video Cable
Cable (RCA x 1)
VIDEO
VIDEO
R – AUDIO IN – L (MONO)
AUDIO IN
S – VIDEO
COMPUTER
MCI
COMPUTER IN
ANALOG
CONNECTING PROJECTOR
Component video output equipment.
(such as DVD player or high-definition TV source.)
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Video Cable
(RCA x 3)
Y - Pb/Cb - Cr/Pr
Y – Pb / Cb – Pr / Cr
R – AUDIO OUT – L
RESET
USB CONTROL PORT
AUDIO OUT
Audio Cable
(Stereo)
Audio Input
External Audio Equipment
Audio Speaker
Audio Amplifier
(stereo)
Audio Output
(R, L)
Audio Cable
(RCA x 2)
AUDIO IN
Terminals
of the Projector
13