Table of Contents
Advertisement
G e n e r a l i n f o r m a t i o n
The module PIN is required to access the information in the security
module. See "Security module," p. 81.
The signing PIN is required for the digital signature. See "Digital
signature," p. 82.
PUK codes
The personal unblocking key (PUK) code and the universal personal
unblocking key (UPUK) code (8 digits) is required to change a blocked
PIN code and UPIN code, respectively. The PUK2 code (8 digits) is
required to change a blocked PIN2 code. If the codes are not supplied
with the SIM card, contact your local service provider for the codes.
Barring password
The barring password (4 digits) is required when using the
Call barring
service. See "Security," p. 62.
■ Configuration settings service
To use some of the network services, such as mobile Internet services,
MMS, Nokia Xpress audio messaging, or remote Internet server
synchronization, your phone needs the correct configuration settings.
You may be able to receive the settings directly as a configuration
message. After receiving the settings you need to save them on your
phone. The service provider may provide a PIN that is needed to save the
settings. For more information on availability, contact your network
operator, service provider, nearest authorized Nokia dealer, or visit the
support area on the Nokia Web site, www.nokia.com/support.
When you have received the settings as a configuration message, and
the settings are not automatically saved and activated,
Configuration
settings received
is displayed.
To save the settings, select
Show
> Save. If the phone requests
Enter
settings'
PIN:, enter the PIN code for the settings, and select OK. To
receive the PIN code, contact the service provider that supplies the
settings. If no settings are saved yet, these settings are saved and set as
default configuration settings. Otherwise, the phone asks
Activate saved
configuration
settings?.
To discard the received settings, select
Exit
or
Show
> Discard.
10
Advertisement
Table of Contents
