Lens Installation; Positioning Projector; Lens Shift Adjustment - Sanyo PLC-XF30N Owner's Manual

Sanyo plc-xf30n: owners manual

Hide thumbs Also See for PLC-XF30N:

Specifications (1 page)

Service manual (88 pages)

Table Of Contents

Table of Contents

This projector is equipped with Model LNS-S02 lens. If you use other type of lens, refer to Lens Replacement

and Installation Manual in this projector and install the lens properly.

NOTE: Before replacing lens, check where a projector is used and prepare suitable lens. For specifications of a

Projector Lens, refer to Lens Replacement and Installation Manual in this projector

When moving or setting up a projector, be sure to replace Lens Cover to protect surface. And be

careful not to hold or subject lens to strong forces. It may damage lens, cabinet, or mechanical parts.

This projector is designed to project on a flat projection

surface.

ROOM LIGHT

Brightness in a room has a great influence on picture

quality. It is recommended to limit ambient lighting in

order to provide best image.

VENTILATION

This projector is equipped with cooling fan to protect it from

overheating. Pay attention to following to ensure proper venti-

lation and avoid a possible risk of fire and malfunction.

Do not cover vents with papers or other materials.

Keep rear grill at least 3 feet (1 m) away from any

object.

Make sure that there are no objects under a pro-

jector. An object under a projector may prevent a

projector from taking cooling air through bottom

vent.

Projection lens can be moved up and down with motor-driven lens shift function. This function makes it easy to

provide projected image where you want.