Product Features; Built-In Timer - HoMedics AP-DT10-GB Instruction Manual

Table of Contents

Advertisement

PRODUCT FEATURES

CONTROL PANEL
ALL-IN-ONE HEPA-TYPE FILTRATION SYSTEM
HEPA-TYPE FILTRATION
Removes up to 99% of airborne particles as small as
0.3 microns, such as allergens, pollen, dust, germs, pet
dander, odour, mould spores, and smoke from air that
passes through the filter.
CARBON ODOUR FILTRATION
Reduces household odours and VOCs (volatile organic
compounds)/gases as shown by independent laboratory
testing.
PRE-FILTER
Captures large particles.
IONISER WITH ON/OFF
When on, the ioniser assists in the air purification process.
3 SPEEDS
Low, medium, and high speeds.

BUILT-IN TIMER

Choose from 4, 8, or 12 hours.
REPLACE FILTER INDICATOR
Illuminates when it is time to replace the filter.
SUGGESTED ROOM SIZE
11.9 M
/128 FT
. Portable air purifiers will be more
2
2
effective in rooms where all the doors and windows are
closed.
AIR CHANGES PER HOUR
This air purifier will purify the air in a 11.9 M
room (assuming an 2.43 M/8 FT ceiling) 4.8 times per hour
on high speed in a closed room.
OIL TRAY
Includes 3 essential oil pads. Use with essential oil (not
included) to deliver scent into the air.
ALL-IN-ONE HEPA TYPE FILTER
/128 FT
2
2
GRILLE COVER
OIL TRAY
CONTROL PANEL
POWER
OPERATING INSTRUCTIONS
BEFORE TURNING THE UNIT ON
• Take the air purifier out of the box and remove the clear
protective plastic bag.
• Place the air purifier on a firm, level surface.
• Plug the power cord into a standard AC outlet.
POWER BUTTON AND FAN SPEED SETTINGS
• To turn the air purifier on, press the power
• This air purifier has 3 fan speed settings: low (1), medium (2),
and high (3). The higher the fan speed setting, the faster the
air will be purified. To select or change fan speed, press the fan
speed
button until the desired setting is reached.
IONISER SETTING WITH ON/OFF
Ion particles have a positive or negative charge that attach to
airborne particles, making them easier to be captured by the
filtration system. Press the ioniser ION button to turn the ioniser
on. The blue light will glow to indicate the ioniser is in use. Press
the ioniser ION button again to turn the ioniser off.
NOTE: Dust particles may accumulate on surfaces around the
air purifier when the ioniser is in use. These dust particles can be
vacuumed or wiped away with a soft, damp cloth.
NOTE: You may hear occasional popping sounds when the ioniser
is used. This is normal.
NOTE: The ioniser produces less ozone than the UL-established
limits of 0.05 ppm. Ozone may be harmful around birds and
small pets. To prevent ozone buildup, use the ioniser feature in a
well-ventilated area.
TIMER
Press the timer
button until the desired timer setting is lit on
the display. The timer
button will cycle through the following
REPLACE FILTER LIGHT
FAN SPEED IONISER ON/OFF TIMER
button.

Advertisement

Table of Contents
loading

Table of Contents