Table of Contents
Advertisement
example GPL or LGPL) to you on an appropriate media, against an administrative fee cov-
ering Doro AB's cost for handling the distribution and costs for media. Please direct such
request to Doro AB, Open Source Software Operations, Jorgen Kocksgatan 1B, SE 211 20
Malmö, Sweden. To be valid, such a request must be made within three (3) years from the
date of the distribution of this product by Doro AB, or in the case of code licensed under
the GPL v3 for as long as Doro AB offers spare parts or customer support for this product
model.
Hearing aid compatibility
Note!
For hearing aid compatibility, turn off Bluetooth connectivity.
This phone is hearing aid compatible. Hearing aid compatibility is not a guarantee that a
specific hearing aid will work with a specific phone. Mobile phones contain radio transmit-
ters that may interfere with hearing aid performance. This phone has been tested for use
with hearing aids, for some of the wireless technologies that it uses, but there may be
some newer wireless technologies that have not been tested yet for use with hearing aids.
To ensure that a specific hearing aid works well with this phone, test them together be-
fore making a purchase.
The standard for hearing aid compatibility contains two types of ratings:
•
M: To use your hearing aid in this mode, make sure that your hearing aid is set to
"M-mode" or acoustic coupling mode, and position the phones receiver near the
hearing aid's built-in microphone. For the best results, try using the phone in differ-
ent positions relative to your hearing aid—for example, placing the receiver slightly
above the ear may result in better performance for hearing aids with microphones
positioned behind the ear.
T: To use your hearing aid in this mode, make sure that your hearing aid is set to "T-
•
mode" or telecoil coupling mode (not all hearing aids have this mode). For the best
results, try using the phone in different positions relative to your hearing aid—for ex-
ample, placing the receiver slightly below or in front of the ear may result in better
performance.
Your device meets the M4/T3 level rating.
Specific Absorption Rate (SAR)
This device meets applicable international safety requirements for exposure to radio
waves. Your mobile device is a radio transmitter and receiver. It is designed not to exceed
the limits for exposure to radio waves (radio frequency electromagnetic fields) recommen-
ded by international guidelines from the independent scientific organization ICNIRP (In-
ternational Commission of Non-Ionizing Radiation Protection).
The radio wave exposure guidelines use a unit of measurement known as the Specific Ab-
sorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg averaged over 10 grams
of tissue and include a substantial safety margin designed to assure the safety of all per-
sons, regardless of age and health.
Tests for SAR are conducted using standard operating positions with the device transmit-
ting at its highest certified power level in all tested frequency bands. The highest SAR val-
ues under the ICNIRP guidelines for this device model are:
English
79
Advertisement
Table of Contents
