Remington D1500AU Use & Care Manual page 5

VOLTAGE SELECTOR
Your Remington Jet Setter 2000 dryer is designed to work on either 120 volts
®
or 240 volts. The Jet Setter dryer comes with a voltage selector key, which
can be used to switch the voltage to either 120v or 240v, depending on the
supply voltage of the country you are in. To change the voltage of the dryer,
simply insert the voltage selector key into the voltage selector switch, and turn
anti-clockwise for 120v, or clockwise for 240v. Remington supplies the unit only
with an Australian plug.
*Note: Before using, make sure the voltage selector is positioned to
correspond with the correct supply voltage of the country you are in. The
supply voltage for Australia is 240V.
HAIR MAINTENANCE
For optimal results, shampoo and condition your hair prior to styling and towel
dry to remove excess moisture.
QUICK DRYING
Select high heat/speed setting and roughly dry hair. Use a brush or your hand to
shake out excess moisture whilst drying and keep the dryer in constant motion.
STRAIGHTENING
Select medium heat/speed setting and roughly dry the hair. When the hair
is nearly dry, attach the concentrator nozzle (which minimises frizz) and
reduce the heat/speed. Section the hair according to thickness and begin with
straightening bottom layers first. Using a round or flat thermal brush, follow the
brush with the concentrator from above, while slowly gliding down each section
of hair from roots to tips. Once bottom layers have been straightened, then
straighten the mid section and complete by straightening the top layers.
NATURAL WAVY TEXTURE
Using the low heat/speed setting, 'scrunch' sections of hair with your fingers
into the palm of your hand while directing airflow through your fingers. For more
volume, lean forward and dry hair in the upside down position.
LIFT & VOLUME
Using the dryer on medium heat/speed setting, work from the roots of the hair
and begin at the back of the head. Section your hair and use a brush or your
fingers to dry against its natural growth pattern. This creates lift at the roots,
which creates a style with volume.
STYLING
Set the dryer to low heat/speed setting and attach the concentrator nozzle
for precision drying. Section the hair, and style using a round thermal styling
brush. Concentrate the airflow directly on the hair while styling in the direction
you desire. If necessary, hold the airflow for 2-5 seconds on each section while
curling under or over for additional hold.
5