Control Panel; First Use - Zanussi ZRB34211XA User Manual

Control panel

Temperature indicators LED
1
QuickChill button
2
Temperature regulator
3
Switching on
Insert the plug into the wall socket.
Temperature regulation
To operate the appliance, proceed as follows:
• touch the temperature regulator button until
the LED corresponding to the required tem-
perature lights up. Selection is progressive,
varying from 2 to 8°C.
At first button touch actual setting LED keeps
blinking.
Any time the button is touch the set tempera-
ture is moved to 1 position . Corresponding
LED will blink for a while.
Touch the setting button until the required
temperature is selected. The set will be fixed
coldest setting: +2°C
warmest setting: +8°C

First use

Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap so
6
1
3 2
A medium setting is generally the most suitable.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
appliance depends on:
• room temperature
• how often the door is opened
• quantity of food stored
• appliance location.
QuickChill function
You can activate the QuickChill function by
pressing the QuickChill button.
The LED corresponding to the symbol Quick-
Chill indicator lights up.
You can deactivate the QuickChill function by
pressing the QuickChill button again.
The QuickChill indicator will light off.
Important!
This function stops automatically after 52 hours.
as to remove the typical smell of a brand-new
product, then dry thoroughly.
Important! Do not use detergents or abrasive
powders, as these will damage the finish.
www.zanussi.com