General Notes; Specifications; Warranty - Hifonics Medusa M8-DSP Owner's Manual

MODELL
Frequency Range –3dB
Signal-to-Noise Ratio
Channel Separation
THD&N
Input Sensitivity
Input Impedance
DSP Processor
Signal Output
Signal Input
Optional Inputs
M-CONTROL DSP-Software
Remote Controller with LED-Display
Dimensions
Width x Height x Length
Technical specifications are subject to change! Errors are reserved!
The warranty complies with legal regulations. Failures or damages caused by overload, improper use or by using the product for compe-
titions are not covered by the warranty. Please return the defective product only with a valid proof of purchase and a detailed malfunction
description to your retail store, where you have purchased this product.
All HiFonics devices are labeled with a individual serialnumber, which will be registerd for statistic and service conditional purposes.
All HiFonics devices are also labeled with a CE-Certification Mark. Thereby these devices are certified for a use inside vehicles
inside the European Union (EU).

GENERAL NOTES

SPECIFICATIONS

M8-DSP
5 Hz - 20 kHz
> 110 dB
> 60 dB
0,05%
5 - 0,3 V
> 47 kOhms
Cirrus Logic Single Core 32 bit, 8 channel, 192 kHz
8 x RCA
6 x RCA
TOSLINK (optical 12 ~ 96 kHz, stereo)
AUX (3,5 mm jack, stereo)
for Microsoft Windows™
XP SP3, Vista, 7, 8, 8.1
10 Presets, Gain -40 ~ +12dB
6 x 31-Band Equalizer, 2 x 11-Band Equalizer, -18 ~ 12 dB, Q 0,5 ~ 9
Setting range 20 ~ 20.000 Hz (Outputs A-F), 20 ~ 200 Hz (Outputs G-H)
6 ~ 48 db/Oct. HP/BP/LP
Time Delay 0~15 ms/0~510 cm
Phase Shift 0°/180°
for Master Volume, Subwoofer Volume,
Input Selection, Mode Selection
120 x 40 x 216 mm

WARRANTY

27