Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hifonics BXiPRO3.0
Summary of Contents for Hifonics BXiPRO3.0
- Page 1 Operator’s Guide BXiPRO3.0 Digital Bass Enhancement Processor...
- Page 2 Thank you for purchasing the HIFONICS BXiPRO3.0 Digital Bass Enhancement Processor. This unit has the ability to fine tuning bass width and sweep for increased sound performance. Please read the entire manual to ensure proper connections and application. CAUTION Always consider consulting a professional audio installer before installing any audio components.
- Page 3 Mounting and Hardware Prior to mounting, connect the wires to ensure proper operation. MOUNTING 1. Select the desired mounting location that allows the unit to be mounted on a flat surface with room for connections. 2. Use the mounting brackets that are attached to the unit and use the provided hardware for mounting the unit.
-
Page 4: Functions And Operations
Functions & Operations Adjustable bass enhancement preamp output Bass remote input Preamp full range output Adjustable bass level output Adjustable bass width and sweep adjustments Output level control with clip indicators Input level control with clip indicators Selectable input level range (RCA or speaker level) Selectable turn on trigger (remote wire input, DC sense and signal sense) Low level inputs (RCA level) High level input (speaker level) - Page 5 Functions & Operations Output Clip Indicator Input Clip Indicator...
-
Page 6: Width Control
Frequency response Full Range Frequency response Full Range Width Sweep 50Hz 100Hz Narrow Wide Width Control Sweep Control Controls how wide the frequency range Allows you to select the center that is centered on the sweep frequency frequency the BXiPRO3.0 outputs... - Page 7 Unit Setup with Aftermarket Source Unit...
- Page 8 Unit Setup with Factory Source Unit...
-
Page 9: Diagnostics And Troubleshooting
Diagnostics & Trouble Shooting The key to finding the problem in a troubled sound system is to isolate parts of that system in a logical fashion to track down the fault and correct the issue. The diagnostic system will not shut down the crossover or the amplifier(s), although the amplifier(s) own protection circuitry may shut the amplifier(s) down, should a fault status occur. -
Page 10: Specifications
USA Inc. This warranty is limited to defective parts and specifically excludes any incidental or consequential damages connected therewith. To view the full warranty, please visit the website. Autotek products are designed and engineered in the USA by www.maxxsonics.com HF BXiPRO3.0 QSG 01 - rev2...