Table of Contents
Advertisement
To discard new data:
Press any key when the warning message appears.
1.
Select
(right softkey).
2.
Discard
Highlight
and press
3.
Yes
Tip:
don't affect to the downloaded data that you have already
Replace
assigned. Because the downloaded data that you have set to wallpaper or
incoming call is not erased.
Using the Downloaded Data
Setting a Downloaded Melody to the Ringer or Start-up/Power-off Tone.
From the Standby mode, press
1.
Highlight
2.
Downloads
Highlight
to display the Downloaded data.
3.
Data List
Highlight your desired downloaded melody title and press
4.
Then starts to play the selected melody.
Press
or wait for ending of the melody play.
5.
Highlight
6.
Set Ringer
press
.
Select the space to assign your selected melody.
7.
If your selected space is already assigned, you are prompted whether
overwrite it or not.
The capacity of downloading is as shown below.
Item
Maximum Size per Unit
Ringer Melody
Start-up Tone
Power-off Tone
See the SANYO Multimedia Master User Guide included in the SCP-5150
for downloading. Sprint PCS Wireless Web
purchased for downloading the data.
Note: If you have no downloaded data, "No Data Downloaded" is shown
on the display.
Tip: It's better to erase the downloaded data that you have already set to
Ringer or Start-up/Power-off tone. See page 115.
.
to display the main menu.
and press
.
,
or
Set St-up Tone
Set Pw-off Tone
Maximum Assignment
~20 KB
20 files
~100 KB
2 files
~20 KB
3 files
~20 KB
3 files
TM
Connection kit must be
Personal Information Management
.
and
Section 12
113
Advertisement
Table of Contents
