Using The Battery - Sanyo SCP-4500 User Manual

SCP-4500 (Qurak)-1 2000.6.5 13:33
Tip:
Be sure to charge your
phone's battery and
watch your indicator
to ensure your levels
are OK.
24
Page 24

Using the Battery

Installing the Battery
Your Sprint PCS Phone comes with a Lithium
Ion battery. Follow these steps to install it:
Place the battery in the opening at a
1.
45-degree angle with the metal contacts at
the bottom, facing downward.
Gently press down until it's in place and
2.
the battery release latch snaps.
Removing the Battery
To remove your battery for charging or for
another reason, follow these easy steps:
Make sure the power is off so that you don't
1.
lose any stored numbers or messages.
Press up the battery release latch and hold
2.
the battery, then pull it up and out at a
45-degree angle.
Charging the Battery
Your Sprint PCS Phone comes with a
rechargeable battery. You should charge the
battery as soon as possible so you can begin
using your phone.
Keeping track of your battery's charge is
important. If your battery level becomes too
low, your phone automatically turns off and
you'll lose everything you were just working
on. For a quick check of your phone's battery
level, glance at the battery charge indicator
located in the upper-right corner of your
Getting to Know your Sprint PCS Phone