Table of Contents
Advertisement
5.9
RAID 0/RAID 1 configurations
The motherboard includes the Silicon Image Sil 3112A controller chipset
and two Serial ATA interfaces to support Redundant Array of Independent
Disks (RAID) configuration. This feature supports Serial ATA hard disks.
Use the SATARaid™ utility to configure the RAID sets.
RAID 0 (called data striping) optimizes two identical hard disk drives to
read and write data in parallel, interleaved stacks. Two hard disks perform
the same work as a single drive but at a sustained data transfer rate,
double that of a single disk alone, thus improving data access and
storage.
RAID 1 (called data mirroring) copies and maintains an identical image of
data from one drive to a second drive. If one drive fails, the disk array
management software directs all applications to the surviving drive as it
contains a complete copy of the data in the other drive. This RAID
configuration provides data protection and increases fault tolerance to the
entire system.
NOTE:
For more information about the Silicon Image Sil 3112A SATA
RAID controller, refer to the Silicon Image SATA RAID User's Manual
found in "\Drivers\SATA\SATARaid_Manual_Rev092.PDF" of the
motherboard support CD.
5.9.1 Install the hard disks
The Sil 3112A chipset supports Serial ATA hard disk drives. For optimal
performance, install identical drives of the same model and capacity when
creating RAID sets.
• If you are creating a RAID 0 (striping) array for perfomance, use two
new drives.
• If you are creating a RAID 1 (mirroring) array for protection, you can use
two new drives or use an existing drive and a new drive (the new drive
must be of the same size or larger than the existing drive). If you use two
drives with different sizes, the smaller capacity hard disk will be the base
storage size. For example, hard disk A with an 80 GB storage capacity
and hard disk B with 60 GB storage capacity, the maximum storage
capacity for your RAID 1 set will be 60 GB.
ASUS A7N8X motherboard user guide
91
Advertisement
Table of Contents
