Camera Connectors; Battery Life - Sanyo Xacti VPC-HD1 Instruction Manual

Camera connectors

[USB/AV]
(communication/
audio and video
output) terminal
[COMPONENT]
(720p output)
terminal
[MIC]
(microphone
input) terminal
DC IN (external
DC power input)
terminal

Battery life

Shooting Still image
shooting mode
Video clip
recording mode
Playback
i Until battery pack runs out when using a fully charged battery pack at a
25°C (77°F) ambient temperature.
i The operation time may vary depending on the conditions of the battery
pack and the conditions of use. Especially when used at temperatures
below 10°C (50°F), the battery pack operation time is drastically reduced.
Regrouped jack
Audio 265 mVrms (–9 dBs), 12 kΩ or less, stereo
output
1.0 Vp-p, 75 Ω unbalanced, sync negative,
Video
output composite video
NTSC color TV system/PAL color TV system
(switchable from the Option Screen)
Y signal: 1.0 Vp-p, 75 Ω, unbalanced, sync
S-video
output
C signal: 0.286 Vp-p, 75 Ω, unbalanced
NTSC color TV system/PAL color TV system
(switchable from the Option Screen)
USB USB 2.0 High-speed
720p video output
Y signal: 1.0Vp-p/75 Ω unbalanced, tri-level sync
Pb and Pr signals: 0.7Vp-p/75 Ω unbalanced
Ø2.5 mm stereo mini jack (converts to a Ø3.5 mm stereo mini
jack by the supplied microphone connection cable), 2 Ω.
Sensitivity: less than –42 dB (plug-in power type microphone)
DC 5 V (for exclusive use with the supplied AC adaptor
[VAR-G9])
150 images:
60 minutes:
150 minutes:
negative
CIPA standard (when a Hagiwara
Sys-Com 512MB SD Memory Card
is used)
Recorded in HD-SHQ mode
(1,280 × 720 pixels, 30 fps)
Monitor on, continuous playback
184
English