Sanyo Xacti VPC-HD1 Instruction Manual page 189

Shutter speed
Sensitivity
Image stabilizer
Monitor
Flash working
range
Flash modes
Focus
Self-timer
Ambient
environment
Still image shooting mode: 1/2 to 1/2,000 sec.
(Maximum approx. 4 seconds when scene select
function set to lamp Q)
(During flash: 1/30 to 1/2,000 sec.)
Sequential shots shooting mode: 1/15 to 1/2,000
second (no flash)
Video clip shooting mode: 1/30 to 1/10,000 sec.
Still image shooting mode:
Auto (equivalent to ISO 50 to 200)/equivalent to
ISO 50, ISO 100, ISO 200, and ISO 400
(switchable from Shooting Setting Screen)
Video clip shooting mode:
Auto (equivalent to ISO 200 to 800)/equivalent to
ISO 200, ISO 400, ISO 800 and ISO 1600
(switchable from Shooting Setting Screen)
* Maximum ISO sensitivity up to 1,600
equivalent when Scene Select function is set to
Q
Electronic
2.2-inch organic EL
Approx. 210,000 pixels
(Frame coverage: Approx. 100%)
GN = 6.4
Approx. 35 cm (13.78 in.) to 2.5 m (8.20 ft.)
(Wide)
Approx. 1 m (3.28 ft.) to 2.5 m (8.20 ft.) (Tele)
Auto-flash, forced flash, flash off, red-eye reduction
TTL-type AF (still image shooting mode: 5-point
range finder/spot focus; video clip recording mode:
continuous area focus), manual focus (22 steps)
Approx. 2-second delay, 10-second delay
Temperature 0 to 40°C (32 to 104°F) (operation),
–20 to 60°C (–4 to 140°F) (storage)
Humidity 30 to 90% (operating, no
condensation)
10 to 90% (storage, no
condensation)
182
English