Emptying Collection Tanks And Bags - Graco LazerVac 25M858 Operation, Parts

7. Insert new bags into the collection tanks and insert
the Dust Bag Holder on top of the bag. Then reinsert
the tanks into the Cyclone separator and into the
bottom of the LazerVac. Ensure the Dust Collection
Tank is securely attached to the body of the vacuum
by pushing down on the Engagement Lever.
Cyclone LP
1. When Vacuum Collection Bag has collected
approximately 45 lbs (20 kg) of dust, the bag should
be replaced.
2. Pull down on the continuous bag to expose 6 - 12"
(15 - 30 cm) of new, unused bag.
3. Use a cable tie to tie off the top of the bag. Fasten
another cable tie 2" (5 cm) cable tie above the first
cable tie.
3A5576E
4. Put on respirator. Cut the bag between the two
cable ties.
5. Dispose of the dust bag. Follow local ordinances
and regulations for disposal.
6. Pull down on the new bag attached to the vacuum
until the bottom of the bag rests on the bottom of the
vacuum cart. Ensure the bottom of the bag is tied off
firmly with the cable tie.
Operation
9