Philips X Line 55BDL8007X User Manual page 40

55BDL8005X/55BDL8007X
Keypad control
Choose to enable or disable the display Keypad (control
buttons) function.
• {Unlock} - Enable the Keypad function.
• {Lock All} / {Lock all but Volume} / {Lock all but Power}
/ {Lock all except PWR & VOL} - Disable the Keypad
function.
NOTE: "Keypad Control Lock Mode" This function
completely disables the access to all Keypad Control
functions. To enable or disable the Keypad control
lock, press both [ ] and [ ] buttons and hold down
continuously for more than 3 seconds.
Tiling
With this function you can create a single large-screen matrix
(video wall) that consists of up to 225 sets of this display (up
to 15-sets on the vertical and 15-sets on the horizontal sides).
This function requires a daisy-chain connection.
Tiling
H monitors
V monitors
Position
Frame Comp.Top
Frame Comp. Bottom
Frame Comp. Left
Frame Comp. Right
Frame Comp.
Enable
Switch on delay
Brightness
Output Content
Example: 2 x 2 screen matrix (4 displays)
H monitors = 2 displays
V monitors = 2 displays
H monitors
1
3
Example: 5 x 5 screen matrix (25 displays)
H monitors = 5 displays
V monitors = 5 displays
1
1
1
0
0
0
0
Off
Off
Off
Normal
Current Video
2
Position
4
1 2
6 7
11 12
16 17
21 22
• {H monitors} - Select the number of displays on the
horizontal side.
• {V monitors} - Select the number of displays on the
vertical side.
• {Position} - Select the position of this display in the screen
matrix.
• {Frame comp. Top} - set the pixel numbers of top frame
compensation
• {Frame comp. Bottom} - set the pixel numbers of bottom
frame compensation
• {Frame comp. Left} - set the pixel numbers of left frame
compensation
• {Frame comp. Right} - set the pixel numbers of right
frame compensation
• { Frame comp.} - Choose to turn the frame compensation
function on or off. If selected {Yes}, the display will adjust
the image to compensate for the width of the display
bezels in order to accurately display the image.
• {Enable} - Choose to enable or disable the Tiling function.
If enabled, the display will apply the settings in {H
monitors}, {V monitors}, {Position}, and {Frame comp.}.
• {Switch on delay} - Set the power-on delaying time (in
seconds). The default option {Auto} allows a sequential
powering-on for each display by their ID number when
multiple displays are connected. The options are: {Off/
Auto/2-255}
• Brightness: {Normal}/{ACS}
{Normal}: Apply OSD brightness value (backlight)
{ACS}: Apply brightness value (backlight) which is adjusted
by MIC tool. The default value before adjustment is the same
as OSD brightness value, e.g., 70)
Some brightness (backlight) settings cannot be adjusted by
OSD. Please refer to Picture Menu Backlight setting priority.
• Output content : Select DP out transfer source
{Current Video} :transfer Current Video Source
{Displayport} : Forced to transfer source of Displayport
Off Timer
Set automatically power off time (in hours).
38
H monitors
3 4 5
8 9 10
13 14 15
18 19 20
23 24 25
Position