Mounting The Tv To A Wall; Front / Right Side View And Controls - JVC LT-32C655B Instruction Manual

Mounting the TV to a Wall

Remove the stand assembly before mounting the TV onto the wall.
1. Remove the 4 screws from the neck of the stand and detach the
stand.
2. This TV is designed to be wall-mounted
with a standard 200 mm x 100 mm
mounting kit (sold separately) designed
for flat-panel TVs. Mount this TV according
to the instructions included in the
mounting kit. Due to space restrictions,
we recommend that you make all
connections before mounting on to
the wall.
• If you are wall mounting your TV you may wish to buy a 90° HDMI adapter. This will help with your cable management.
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance please call our Call Centre on (UK) 0344 561 1234 or (Ireland) 1 890 818 575.
Our Customer Contact Centre is open 24/7.

Front / Right Side View and Controls

1
2
Item
1 MULTI FUNCTION SWITCH
2 POWER LED
3 IR (Infrared Receiver)
4
5
LT-32C655(B)_IB.indd 11
200mm
100mm
Four mounting holes
(size M4 screw)
3
Description
Switches the TV into standby and on. Selects modes (channel,volume, and source).
Illuminates when the TV is in standby mode. The LED will blink confirming that a timer
recording programme has started in the standby mode.
Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Press to start playback or pause. (DVD mode)
Press once to stop playback and leave in resume state. (DVD mode)
Press twice to stop playback completely. (DVD mode)
Press to eject disc. (DVD mode)
Preparation
2
x4
LAN
VGA
SPDIF
Coax.OUT
SCART
LAN
SPDIF VGA
Coax.OUT
SCART
4
5
11
01/03/2016 16:20