DVR User Manual
Alarm Management
"Draw Area" and then click around the area where you want to set as the alarm area in the
image (the alarm area should be a closed area). Uncheck the "Draw Area" if you finish the
drawing. Click the "Clear" button to delete the alarm area.
⑤ Click "Apply" to save the settings.
⑥ Click "Processing Mode" to go to the alarm handling configuration interface of object
detection.
Object Detection Alarm Handling Configuration:
① Click StartSettingsAlarmIntelligence AlarmObject Detection to go to the
following interface.
② Enable or disable "Snapshot", "Push", "Alarm-out", "Preset", "Buzzer", "Pop-up Video"
and "E-mail". The alarm handling setting of object detection alarm is similar to that of the
sensor alarm (see 9.1 Sensor Alarm for details).
71