TechVision PS16P2N5 Manual page 48

PTZ

Advanced 3D Control
Double click the left button of the mouse on any area of the camera image and then the image
size will be doubled and centered on the clicked point.
Press and hold the left button of the mouse on any area of the camera image to zoom in the
image; press and hold the right button to zoom out the image.
Move the cursor of the mouse to the camera image and then slide the scroll wheel of the mouse
forward to zoom in the image, slide the scroll wheel of the mouse backward to zoom out the
image.

OSD Setting
Go to PTZ protocol setting interface and then set the protocol to COC before you call the OSD.
Click "OSD" to go to camera OSD setting interface. Click
meanings of the buttons are shown in the table below.
Button
The OK button; you can click it to start OSD.
Click it to change the menu mode or decrease the menu value.
Click it to change the menu mode or increase the menu value.
Click it to go to the previous menu.
Click it to go to the next menu.
42
to start OSD setting. The
Meaning
DVR User Manual