RainPoint Smart+ HCS008 - Water Flow Meter Manual

What in the box

1. HCS008FRF Water Flow Meter
   
2. (For NH thread/ USA-type)
   
   3/4" Faucet End Connector (NH Thread/ USA-type)
   
   3/4" Faucet Adapter NH Thread/ USA-type (black screw thread)
3. (For BSP thread/ EU-type)
   
   3/4" Faucet End Connector (BSP thread/ EU-type)
   
   3/4" Faucet Adapter BSP thread/ EU-type (gray screw thread)

Note: B and C will be presented according to the country region, two sets of accessories will not be included in the product at the same time.

INTRODUCTION

Product Overview

Specification

• inlet and outlet 3/4"
• water rate 20 L/H to 2400 L/H
• working water pressure 0.5 bar to 8 bar (7-116 psi)
• accuracy ±5%
• communication distance with hub about 60m
• powered by 3*AAA alkaline batteries
• waterproof IPX6

Product Features

• current water flow rate and consumption checking on both LCD and APP
• hourly, daily and monthly water consumption checking via APP
• split type design
• Liter and Gallon switchable
• sleep mode for saving power
• low power alert notification
• water usage warning and correction on APP

CONNECTION AND INSTALLATION

Please scan the QR code or search the link to access the video to connect the device quickly and easily.
Set Video: https://www.youtube.com/watch?v=P2yXpW3ewkI

Flow Meter Connection

This device is a sub-device, please connect the hub of Rainpoint Smart+ series before connecting this device.

1. After the hub is successfully connected. Select the button on the top right corner of the APP home page to add device, or you can go to the hub's home page and use "Sub-devices" to add devices.
   
2. Find "Flow Meter" or the icon to add the sensor.
   
3. Insert the batteries, and then the indicator will quickly blink in red.
   Tips: Pull out the detector and use the tool to unscrew the four screws of the back cover.
   
4. At the same time, select "NEXT" on the APP and start searching devices.
5. Keep the sensor and the hub close to each other to connect automatically.
6. Besides that, you can also re-insert the batteries to reset and reconnect if you fail to connect for the first time.
7. After successfully connecting, the real-time water flow rate and other information will show on the device home page.
   

Installation

Option 1: Install the flow meter on the faucet and tighten it hard.

Option 2: Connect the flow meter with tubes or hose nozzle.

1. 3/4" Faucet End Connector (NH Thread/ USA-type)
2. 3/4" Faucet Adapter BSP Thread/ EU-type (gray screw thread)

1. 3/4" Faucet End Connector (BSP Thread/ EU-type)
2. 3/4" Faucet Adapter NH Thread/ USA-type (black screw thread)

Note:

1. 1 and 5 are available in different type and will be differentiated by region.
2. Please do not remove the connectors while using.
3. The fitting are indivisible parts. Do not split them.
   The fitting and , and change the installation sequence of the fittings.
4. Please follow the flow direction point out on the meter's body.
5. The work distance is within 320 feet in open area. Please do not leave the sensor so far from the hub.

APP FEATURES AND FUNCTIONS

Device Home Page

1. Setting: Basic settings for the sensor
2. Real-time flow rate
3. Data display:
   • Current water usage
   • Last water usage
   • Current time
   • Last time
   • Totay cumulative
   • Total cumulative
4. Charts: Check the water flow in 24 hours, 30 days, and 12 months

Basic Setting

Find the icon on the top right corner of the APP home page to"Settings" page. In the basic settings, you can check and manage the device information, such as name and interface.

Special features

Water Usage Warning: Detect the water usage in hours and send a warning notification if the water usage exceeds the standard.

Water Usage Correction: Correct the water usage value in percentage if needed.

Data Reset: Clear the water usage record in this device.

Charts

Select Charts to review your water consumption hourly, daily and monthly in a bar graph.

If you need more detail information about the operation, please scan the QR code or search the link to access the video to check the device quickly and easily.

Setup Video: http://bit.ly/3WMKuYF

TROUBLESHOOTING

NOTES

• Please make sure to use 2.4GHz band WIFI to connect to this product.
• Must tighten the screws before installing.
• Do not mix old and new batteries or different types of batteries.
• Under freezing temperatures, please keep the sensor away from snow to avoid potential freezing damage.
• Try to use it following the water flow direction.