Table of Contents
Advertisement
Home Connect
en
Connecting to the Home
Connect app
If your appliance is connected to your
home network, you can connect it to the
Home Connect app.
Switch the appliance on.
1.
Wait until the | symbol appears in
2.
the display panel.
Press and hold the Remote Start }
3.
button for more than three seconds.
Aut. network log-in appears in the
display panel.
Use either of the left-hand arrow
4.
buttons to select Connect to the
app.
Use either of the right-hand arrow
5.
buttons to select Connect app.
The appliance will now connect to
your Home Connect app.
50
Open the Home Connect app on
6.
your smartphone or tablet PC and
select Connect to add your new
appliance.
If your smartphone or
Note: .
tablet PC is still connected to the
HomeConnect network, you will
need to connect it to your home
network first.
If your appliance is not shown
7.
automatically, select Appliance
search and then Connect an
appliance in the
Home Connect app.
Carry out the last steps in the
8.
Home Connect app to connect your
appliance.
Use the right-hand arrow button to
9.
select Continue on the appliance.
If the appliance has connected
successfully, App(s) connect. will
appear in the display panel.
You can exit the Home Connect
10.
settings by selecting the Remote
Start } button.
If you were not able to establish
Note: .
a connection, check whether your
smartphone or tablet PC is within range
of your home network or is connected
to this. Try connecting to the
Home Connect app again.
Advertisement
Table of Contents
