Volvo V60 CROSS COUNTRY 2020 Owner's Manual page 318

DRIVER SUPPORT
Deactivating cruise control
Cruise control (CC 44 ) can be deactivated and
switched off.
Press the steering wheel button
1.
> The symbol and indicators turn grey –
cruise control is set in standby mode.
2. Press the steering wheel button ◀ (1) or ▶
(3) to change to another function.
> The driver display's symbol and indica-
tor for cruise control (4) are switched
off – which deletes the stored maxi-
mum speed.
44 Cruise Control
45 Cruise Control
316
Related information
Cruise control (p. 314)
•
Change between cruise control and adap-
•
tive cruise control* in the centre display
(p. 324)
Selecting and activating cruise control
•
(p. 315)
Standby mode for cruise control (p. 316)
•
(2).
Standby mode for cruise control
Cruise control (CC 45 ) can be deactivated and
set in standby mode. This can take place due
to driver intervention or automatically.
Standby mode means that the function is
selected in the driver display but not activated.
In this case, cruise control does not regulate
speed.
Standby mode on driver intervention
Cruise control is deactivated and set to
standby mode if any of the following occur:
The foot brake is used.
•
The gear selector is moved to N position.
•
The clutch pedal is held depressed for
•
longer than 1 minute.
The driver maintains a speed higher than
•
the stored speed for longer than 1 minute.
The driver must then control the speed him-
self/herself.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the setting - the car returns to the last
stored speed when the accelerator pedal is
released.
* Option/accessory.